Harley Davidson
 
Harley Davidson Harley Davidson Harley Davidson Harley Davidson

Harley Davidson
1) Assembly shown with the stock thumb screw
Pics are shown with housing removed from handlebars which is not required when installing.
 Harley Davidson
2)Remove the friction spring
 
Harley Davidson
3) Remove the ‘E’ clip and thumb screw.
Harley Davidson
OEM thumb screw and Cruise Buddy
Harley Davidson
4)Remove nut and handle from Cruise Buddy and screw into the housing, re-install handle and nut.
 
Harley Davidson
5) Install actuator pin as show above
Harley Davidson
 Harley Davidson
6) Replace the friction spring and reassemble housing and adjust per instructions.
Harley Davidson
Harley Davidson
7) Cruise Buddy shown in the ‘off’ position
 Harley Davidson
8) Cruise Buddy shown in the ‘on’ position
Harley Davidson
9) Engaging the Cruise Buddy
 Harley Davidson 10)Disengaging the Cruise Buddy